Supplies and Tools:
Blue painters tape
Metal paint scraper
Paint brush 1-inch
Stucco paint (provided by customer)
Mr. Arjun (Warrior-Prince of the Mahabharata) Gupta noticed my advertisement in the San Bernardino newspaper. Mr. Gupta wanted a door edge cleaned up and painted.
Below are the five steps to repair a patio door edge repair.
Step 1: Fig.1 shows a metal scraper is used to remove flaking paint.
Step 2: Fig.2 shows the application blue tape on the area of the door jamb not to be painted with white primer.
Step 3: After the primer has dried, now is the time to apply the silicone caulking. Fig.3 shows that caulking is being applied to the gap between the stucco and the wood frame.
|Fig.2 Blue tape|
Step 5: Fig.7 shows the completed door and wood frame. Now Mr. Gupta can enjoy his patio door again without paint flaking all over the floor.
|Fig.7 Job |
Update: DIY Advisor has New blogs check them today:
- Handyman Blog: DIY Advisor
- DIY Advisor Sitemap
- Food Blog: From Kiwis To Pistachios
- Food Blog Sitemap
- Tool Blog: DIY Advisor Toolbox
- Tool Blog Sitemap
- Artwork Blog: Light in Dark Artwork
- Artwork Blog Sitemap
- Class-A Tests: DIY Class-A Drivers License Tests
- Class-A Tests Sitemap: Class-A Sitemap
- DIY Poem: DIY Poem Meter Blog
- DIY Poem Sitemap: DIY Poem Sitemap
Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-