|Fig.1 First stucco coat|
Supplies and Tools:
Kilz exterior white primer
Metal paint tray with plastic liner
Paint frame with stucco paint roller cover
Paint brush 2-inch
Tom J. lives in Wrightwood, California where the weather can be quite severe. He called my repair service to investigate why his bedroom window leaked water when it rained. This job was done with my good friend, Carl, who helped me finish the work.
This post shows the two steps to finish the window repairs.
Step 1: Fig.1 shows the first coat of stucco primer on the newly repaired stucco.
Step 2: Fig.2 shows a side view of the finished product. The window has had its second coat of primer and is ready for the painters to paint the house. This ends this bedroom window repair series.
|Fig.2 Job finished|
How To Repair the Missing Stucco around a Bedroom Window:
- Part 1 of 5 - Troubleshooting the Leaks
- Part 2 of 5 - Felt and Caulking
- Part 3 of 5 - Installing Stucco Wire
- Part 4 of 5 - Stucco Patch
- Part 5 of 5 - Stucco Primed
Update: DIY Advisor has New blogs check them today:
- Handyman Blog: DIY Advisor
- DIY Advisor Sitemap
- Food Blog: From Kiwis To Pistachios
- Food Blog Sitemap
- Tool Blog: DIY Advisor Toolbox
- Tool Blog Sitemap
- Artwork Blog: Light in Dark Artwork
- Artwork Blog Sitemap
- Class-A Tests: DIY Class-A Drivers License Tests
- Class-A Tests Sitemap: Class-A Sitemap
- DIY Poem: DIY Poem Meter Blog
- DIY Poem Sitemap: DIY Sitemap
Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-