Fig.1 Flange post view metal fencing |
Supplies and Tools:
Pencil #2
Magnetic torpedo level
White metal post
Tyler Zowat lives in Perris, California. He had a new patio installed late last summer and he wanted to install a little privacy fence. He purchased all his fencing parts from The Home Depot.
This post shows the five steps to troubleshot the area of the privacy fence.
Step 1: Above right fig.1 shows the white metal post bottom flange that will be attached to the patio cement using red-hot anchors, bolts and nuts.
Step 2: Fig.2 shows that two fences were purchased for this job.
Fig.2 White boxed metal fencing description |
Step 3: Fig.3 shows a magnetic torpedo level being used to level the white metal post that will hold the metal fencing in place. For this little fence only a few post were used,
Fig.3 Level on the new metal post is not leveled |
Step 4: Fig.3 shows that this post is leveled.
Fig.4 Level on side of metal post |
Step 5: Fig.5 shows a torpedo level at the top of the post. What made this job more difficult is that the client had installed a slate tile over the patio cement and drilling the slate was more difficult than if just the cement was drilled.
Fig.5 Torpedo Level alignment |
How to Install an Aluminum Metal Fence:
Update: DIY Advisor has New blogs check them today:
- Handyman Blog: DIY Advisor
- DIY Advisor Sitemap
- Food Blog: From Kiwis To Pistachios
- Food Blog Sitemap
- Tool Blog: DIY Advisor Toolbox
- Tool Blog Sitemap
- Artwork Blog: Light in Dark Artwork
- Artwork Blog Sitemap
- Class-A Tests: DIY Class-A Drivers License Tests
- Class-A Tests Sitemap: Class-A Sitemap
- DIY Poem: DIY Poem Meter Blog
- DIY Poem Sitemap: DIY Sitemap
- Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.
Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-
No comments:
Post a Comment