Saturday, September 13, 2014

G.E. Refrigerator # LSHS6LGZBCSS Water Valve - Part 2 of 4 - Remove Cardboard Panel

Fig.1 The tools
By Gary Boutin

Supplies and Tools: 
Clean Towels 
Crescent wrench
Flat head screwdriver 
GE Refrigerator LSHS6LGZBCS Manual
Razor knife with new blades    
     
Mrs. Black has a stainless steel and a white refrigerator in her kitchen. She said she noticed a water puddle near the front of the refrigerator. She called my repair services to have the appliance repaired.  

This post shows the four steps to installing a single rod curtain rods inside plaster walls.

Step 1: Above right fig.1 shows the tools needed to get the cardboard back off the refrigerator.
Step 2: Fig.2 shows the several pages with the refrigerator schematics used by appliance technicians.
Fig.2 The schematic
Step 3: Fig.3 shows the cardboard back panel towards the floor. Fig.4 shows it will take a flat head screwdriver to remove this panel.  
Fig.3 Cardboard panel
Fig.4 screwdriver removing
the pan head screw
Step 4: Fig.5 shows some of the screws are in the middle of the cardboard panel. Notice the arrow below that shows its location.
Fig.5 Arrow shows a 
bolt in the back panel

G.E. Refrigerator Model # LSHS6LGZBCSS Water Valve:

Update: DIY Advisor has New blogs check them today:
  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

No comments:

Post a Comment