Showing posts with label paint liner. Show all posts
Showing posts with label paint liner. Show all posts

Saturday, March 15, 2014

How to Paint Garage Bedroom - Part 11 of 19 - Paint - Rolling Walls

Four inch roller cover
By Gary Boutin

Supplies and Tools:
Paint bucket
Paint pole (extends the roller frame for easier rolling)
Paint gloves Nitrile
Paint liner (plastic)
Paint tarps (cloth and paper)
Paint tray
Paint roller
Paint

Mrs. Dee needed to repair and repaint her bedroom before her net tenet would arrive.

This post shows twelve steps on painting the walls. 

Step 1: Fig.1 shows the tools are all ready to roll the paint on the ceiling and the walls.
Fig.1 Rolling the walls
Step 2: Fig.2 shows the paint roller with paint pole being used to roll the paint on the corner wall.
Fig.2 Rolling by the window
Step 3: Fig.3 shows the paint roller is being rolled up and down the paint tray to apply more paint on the roller.

Fig.3 Roll the paint roller back and forth
Step 4: Fig.4 shows the left side of the wall is being rolled.
Fig.4 Paint the wall damage first coat
Step 5: Fig.5 shows the roller rolls the paint between both the cutting paint.
Fig.5 Paint around the cutting edges
Step 6: Fig.6 shows the wall was just rolled and the paint is wet on the wall.
Fig.6 Shows the paint drying
Step 7: Fig.7 shows the back wall bottom is painted.
Fig.7 Corner painted
Step 8: Fig.8 shows the ceiling and the wall are painted and match perfectly.
Fig.8 Door painted
Step 9: Fig.9 shows the wall has been painted.
Fig.9 Walls painted
Step 10: Fig.10 shows the A/C vent needs to be painted.

Fig.10 Vents painted
Step 11: Fig.11 shows the wall has been painted.
Fig.11 bedroom painted
Step 12: Fig.12 shows that the room is almost painted.
Fig.12 Now to pick up tarps
How to Paint a Garage Bedroom:
Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

How to Paint Garage Bedroom - Part 12 of 19 - Molding - The Tools

Fig.1 Latex Caulking
By Gary Boutin

Supplies and Tools:
Air Compressor with 50-foot hose
Battery Charger and Spare Batteries
Caulking Tubes
Compound Saw
Drywall knives
Floor Lamp 500 Watt
Porter Cable Brad Nailer 
Razor Knife
Tape Measure

Mrs. Dee wanted to upgrade her bedroom.

This post shows the eleven steps to paint the new baseboard moldings.

Step 1: Fig.1 shows a basket of Latex Caulking.
Step 2: Fig.2 shows a Ryobi charger with spare batteries.
Fig.2 Spare Battery and Battery charger
Step 3: Fig.3 and fig.4 shows an Emglo air Compressor with 50-Foot hose.

Fig.3 Emglo Air Compressor
Fig.4 Hose connected
Step 4: Fig.5 shows Porter Cable brad Nailer and fig.6 shows the metal brads in the nail gun.
Fig.5 Porter Cable Brad Nailer
Fig.5 Brads
Step 5: Fig.6 shows tape measure.
Fig.6 Tape Measure
Step 6: Fig.7 shows compound saw. Also fig.8 shows a Halogen Floor Lamp. This lamp is used to assist drying the joint compound, and dry the room paint.
Fig.7 Compound Saw
500 Watt Floor Lamp


How to Paint a Garage Bedroom:

Update: DIY Advisor has New blogs check them today:

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

Sunday, September 15, 2013

How to Repair Candle Damages on Fireplace Mantle - Part 3 of 3 - Sanding and Painting

Fig.1 1000
grit sandpaper
By Gary Boutin

Supplies and Tools:  
3M 1000 Grit Wet or dry Finishing Paper 
Blue painter's tape
Paint brush
Paint can opener
Paint tray
Paint liner
Paint paddle (free with paint) 
Semi-gloss paint (Sherman Williams) 
Yellow rubber gloves

My home suffered from the holiday cheer. A Christmas candle was left lit and it burned almost past its bottom. The candle thankfully did not burn down the house, but it did damage the white fireplace mantle paint.The surface was left blistered and peeling.

This post shows nine steps to complete sanding and painting the mantle. 

Step 1: Fig.1 shows 3M 1000-Grit Wet or Dry Finishing Paper that will be used to sand the primer paint.
Step 2: Fig.2 shows the sandpaper will be used to sand the primer smooth.
Fig.2 Sanded smooth
Step 3: Fig.3 shows a little paint dust left behind after sanding.
Fig.3 Paint dust
Step 4: Fig.4 and fig.5 shows the dust is picked up by a portable vacuum cleaner.
Fig.4 Vacuum paint
Fig.5 Tape picked up
Step 5: Fig.6 shows the the Sherman Williams semi-gloss paint that will be applied to the area. 
Fig.6 Sherman William paint
Step 6: Fig.7 shows the semi-gloss paint has been stirred into one color. 
Fig.7 Stir the paint
Step 7: Fig.8 shows the final coat of semi-gloss paint being applied to the damaged fireplace mantle.
Fig.8 Final Coat
Step 8: Fig.9 shows the fireplace just needs to have the painter's tape removed.

Fig.9 Fireplace mantle

How to Repair Candle Damages on Fireplace Mantle:

Update: DIY Advisor has New blogs check them today:

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

How to Repair Candle Damages on Fireplace Mantle - Part 2 of 3 - Taping and Priming

By Gary Boutin
Claw hammer

 
Part and Supplies:  

Blue painter's tape
Claw Hammer
Kilz Latex Primer ® 
Paint brush
Paint can opener
Paint tray
Paint liner
Paint paddle (free with paint)
Paint primer
Semi-gloss paint (Sherman Williams ®)
Yellow rubber gloves

My home suffered from the holiday cheer. A Christmas candle was left lit and it burned almost past its bottom. The candle thankfully did not burn down the house, but it did damage the white fireplace mantle paint.The surface was left blistered and peeling.

This post shows six steps to apply Kilz Latex Primer® to the damaged fireplace mantel. 

Step 1: Fig.1 shows the preparation of the primer damage. Blue painter's tape was placed around the sanded damage.
Fig.1 The job

Step 2: Fig.2 shows the Kilz® Latex primer can that will be used to prime the fireplace mantle. Notice the top of the can has a paint can opener which often comes when the paint is purchased.
Fig.2 Kilz primer

Step 3: Fig.3 shows the paint being stirred with a paint paddle. Make sure the primer paint is nice and thick with no streaks and one solid color.
Fig.3 Solid white color
Step 4: Fig.4 through fig.7 shows the the primer being applied. Fig.4 shows the first coat of primer paint being applied. Fig.5 shows the paint has dried and another coat was applied in another direction, thus criss-cross the paint. Fig.6 shows the second coat of primer paint applied to the area. Fig.7 show the paint has dried and its ready for the next step.
Fig.4 First coat
Fig.5 Dried primer
Fig.6 Final primer coat
Fig.7 Final primer dried
Step 5: Fig.8 shows the paint can being closed with a claw hammer for the next use.
Fig.8 Sealing the paint
Step 6: Fig.9 through fig.11 shows the clean-up of the paint brushes and the paint paddle. This way these tools can be used for the next job. Fig.9 shows to use a kitchen sink. Fig.10 shows that dish soap was used to clean up the brush. Fig.11 shows the paint equipment is ready for further use.
Fig.9 Clean with water

Fig.10 Dish soap
Fig.11
Cleaned tools
How to Repair Candle Damages on Fireplace Mantle:

Update: DIY Advisor has New blogs check them today:

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-