The Magic Eraser® - Part 3 of 4 - The Microwave to Digital Thermometer®

Mr. Clean Magic Eraser® sponge

By Gary Boutin

Tools and Supplies:
Magic Eraser® sponge
Dry towels (dry area)

This post is the third set of pictures that shows what items the Magic Eraser® sponge cleaned. Please click below if your interested in any of these posts.

This post is the third post that shows twenty one pictures that the Magic Eraser® sponge has cleaned.

	The Magic Eraser® sponge was used on this white microwave.
	The Magic Eraser® sponge was used on the inside of this General Electric Microwave Oven.
	The Magic Eraser® sponge completely removed the grass stain from the Harbor Freight Yellow Bee Radio Controlled Airplane Bee. .
	The Magic Eraser® sponge completely removed the oil stains on Harbor Freight Yellow Radio Controlled Airplane Bee propeller and collings.
	The Magic Eraser® sponge completely removed the oil stains on this 50 foot electrical cord.
	The Magic Eraser® sponge is cleaned all my drywall knives. Additional repairs.
	The Magic Eraser® sponge cleaned the washing machine.
	The Magic Eraser® sponge cleaned the glass scale scratches and footprints.
	The Magic Eraser® sponge cleaned the range parts. The large grey circle are called ASM Burner cap the Magic Eraser sponge works very well on this part.
	The Magic Eraser® sponge removed all food grime from the double grate burner. It cleans the rubber feet very well to but its magic on the  metal burner grate.
	The Magic Eraser® sponge cleaned the shower knobs.
	The Magic Eraser® sponge cleaned around the faucet removing the water mineral deposits from the sink.
	The Magic Eraser® sponge cleaned the garage door inserts.
	The Magic Eraser® sponge cleaned the stucco stained plastic edges.
	The Magic Eraser® sponge cleaned this brass door hinge.
	The Magic Eraser® sponge clean white lateral blinds.
	The Magic Eraser® sponge cleaned the human scent from the Tomcat Mole Trap®.
	The Magic Eraser® sponge cleaned and polish stanchion and gutter. It polished the metal after the cut from the reciprocating saw.
	The Magic Eraser® sponge cleaned all the cake tins from rust and other food that were cooked on the metal tin.
	The Magic Eraser® sponge cleaned this bed unit, from the glass panes above our heads, to the fingerprints on the pull out tray, and wood trim.
	The Magic Eraser® sponge cleaned the plastic Digital Thermometer.

The Magic Eraser® posts below:

• Part 1 of 4 - Aluminum to Automobile hub cap
• Part 2 of 4 - Dishes to Clear Glass Bulbs
• Part 3 of 4 - Microwave to Thermometer
• Part 4 of 4 - Garage Door to Pool Grout

Update: DIY Advisor has New blogs check them today:

• Handyman Blog: DIY Advisor
• DIY Advisor Sitemap
• Food Blog: From Kiwis To Pistachios
• Food Blog Sitemap
• Tool Blog: DIY Advisor Toolbox
• Tool Blog Sitemap
• Artwork Blog: Light in Dark Artwork
• Artwork Blog Sitemap
• Class-A Tests: DIY Class-A Drivers License Tests
• Class-A Tests Sitemap: Class-A Sitemap
• DIY Poem: DIY Poem Meter Blog
• DIY Poem Sitemap: DIY Poem Sitemap

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

How to Install Washing Machine Hookup Wall Port

Fig.1 Laundry Port

By Gary Boutin

Supplies and Tools:
Channel® locks pliers
Teflon® tape  
Washing machine Port
 
Most new homes have a room specifically for the use of laundry appliances and this is the location of the washing machine hook ups. The installation is similar even if you have a home with the washing machine in the garage or on the porch. There will be a place where you find an electrical outlet, a cold and a hot water spigot and a drain line, and that will be the location for laundry appliances.

This post shows the the six steps below to install your washing machine port.

Step 1:  First the washing machine needs to be near the hookup ports. Above fig.1 shows the photo shows the washing machine port in the wall. The port consists of two spigots, usually one with a red handle meaning hot hose and a blue meaning cold hose. There is also the drain for the washing machine to empty itself, the hole is usually on the left side. The drain line is  usually a black pipe which measures 1 1/2 inches in diameter. The pipe can be made of ABS plastic or metal.If you are unsure what hose to use, look at the back of the washing machine and the hot and cold are stamped into the back. Some washing machine have a red mark on the hot water side, others have both colors.
Step 2: Now apply Teflon® tape to both the hot and the cold spigot threads, the tape is thin and is enough to assure that the washing machine hose threads are sealed preventing water leakage. Fig.2 shows there is no port in the wall, apply the Teflon® tape over both the hot and cold water spigots threads. Usually the left spigot is the hot and the right spigot is the cold. In some older homes the plumbing may be reversed, and a bucket needs to be placed under the water spigot to make sure the hot water is correctly placed on the washing machine.

Fig. 2 Teflon tape

Step 3: Fig.3 shows to start hooking up the washing machine hoses. The use of  Channel® lock pliers are used to tighten the hose threads onto the spigot threads.  In this picture the hot side spigot threads is tightened to the hose coupling.

 Fig.3
Channel® lock pliers

Step 4: Fig.4 shows the cold side, just repeat the procedure for the hot side and the hose coupling will be finished.

Fig.4 Marking cold hose

Step 5: Wait, we are not finished. We still need to hook up the drain line, it's a rubber hose about 1 1/2 inches in diameter with a bend at the end.  The bend fits inside the hole that is provided within the washing machine port.  If the washing port is not in your home, a black pipe is often what will be used to drain the washing machine. Fig.5 shows the black pipe on the left side of the hot water spigot is the drain hose. Don't forget to plug the electrical cord into the socket to power the washing machine.

Fig.5 Laundry 
ports ready to use

Step 6: Fig.6 shows the washing machine all ready for use. See how easy that was, or you can call a handyman to the job. But with these instructions you are armed with the steps needed just in case the handyman or technician misses a step you can help him/her work out the details. 

Fig.6 Moving 
appliance backwards

 

Handyman Blog: DIY Advisor

Food Blog: From Kiwis To Pistachios

Artwork Blog: Light in Dark Artwork

Class-A Tests: DIY Class-A Drivers License Tests

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-