How to Repair Leaking Copper Pipe Water Damage in a Ceiling Loft

By Gary Boutin

Fiberglass tape

Supplies and Tools:
Cordless drill and Phillips bit
Ladder 6-feet
Latex primer white
Mini roller frame and mini roller
Mud
Sheetrock 1-5/8 coarse screws
Texture 
Wall tape

A young couple saw my add in the PennySaver in San Bernardino County. Carl and I went and gave an estimate for repairing the ceiling inside a kitchen loft. The copper pipe needed to be repaired, we bid it but the customer had a plumber in his family that repaired the leaky copper pipe. We picked up our supplies and fixed this job together.

This post shows the ten steps to repairing a ceiling leak inside a ceiling loft.

Step 1: Set up the ladder underneath the repair and fig.1 shows the copper had been repaired and the ceiling needs work.

Fig.1 Copper pipe leak

Step 2: There was a light near the ceiling damage, fig.2 show Carl dissembled the lamp to check how close the damage was to the water damage.  

Fig.2 Carl taking lamp apart

Step 3: Fig.3 shows the rough edges of the ceiling being cut straight in preparation for new wall board.

Fig.3 Trimming the edges

Step 4: Fig.4 shows the installation of the ceiling supports being placed on both sides of the ceiling damage to hold the new wall board. 
Step 5: Fig.5 shows below left, Carl is trimming the ceiling wall board piece.

Fig.4 Trimming

Fig.5 New wall piece

Step 6: Fig.6 shows the handyman starting to place the new wall board into the damage ceiling.
Step 7: Fig.7 shows Carl is screwing the wall board into the ceiling supports with sheetrock 1 5/8 coarse screws.

Fig.6 Installing piece

Fig.7 Carl here is using 
sheet rock screws

Step 8: Not shown, mud was applied the ceiling and wall board edges in one smooth coating.
Step 9: Once the mud coating was dried, the area was dry sanded and texture was applied. 
Step 10: The ceiling was coated with one coat of latex white primer, the customer had someone else paint the ceiling. The job being done and now the young couple are out looking for their next flip home. Carl and I learned that some job can be rewarding when two good partners work together in God's glory.

Update: DIY Advisor has New blogs check them today:

• Handyman Blog: DIY Advisor
• DIY Advisor Sitemap
• Food Blog: From Kiwis To Pistachios
• Food Blog Sitemap
• Tool Blog: DIY Advisor Toolbox
• Tool Blog Sitemap
• Artwork Blog: Light in Dark Artwork
• Artwork Blog Sitemap
• Class-A Tests: DIY Class-A Drivers License Tests
• Class-A Tests Sitemap: Class-A Sitemap
• DIY Poem: DIY Poem Meter Blog
• DIY Poem Sitemap: DIY Poem Sitemap

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

How to Paint Bathroom Wood Drawers

Fig.1 Drawer that 
need painting

By Gary Boutin

Supplies and Tools: 
Brush 2-inch economy size
Large tarp 9 by 12-feet
Primer white 
Rags for paint drips
Small mini roller cover
Small paint frame
Paint tray
White satin gloss paint

This post shows the six steps on how to paint bathroom drawers.

Willey called my repair service for a small job. He wanted to refresh his bathroom drawers. They had been abused by a former renter and he wanted the drawers to be clean. Below are the steps used to get old drawers to look new again. 

Step 1: Fig.1 shows the first step is to gather the drawers on a 9 by 12 tarp which will confines the paint drips. 
Step 2: Fig.2 shows the use of a 2-inch economy brush and paint one coat of white primer to cover any stains.

Fig.2 Primer

Step 3: Fig.3 and fig.4 shows use a small mini roller painting the sides of the drawer, in this case the right side needed to be painted, it is the side that would show when the drawer is opened. Clean the brush and use the same paint brush to paint the drawers with white satin gloss paint.

Fig.3: Small mini roller

Fig.4 Rolling cabinet edges

Step 4: Fig.5 shows one repainted drawer on the tarp, the first drawer is ready to be placed into the bathroom vanity.  

Fig.5 One repainted drawer

 Step 5: Fig.6 shows all the drawers are dry.

Fig.6 Drawers Dry

  Step 6: Fig.7 shows all the drawers are placed inside the vanity and ready for use.

Fig.7 All Bathroom 
Drawers painted

Handyman Blog: DIY Advisor

Food Blog: From Kiwis To Pistachios

Artwork Blog: Light in Dark Artwork

Class-A Tests: DIY Class-A Drivers License Tests

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-