Tuesday, December 22, 2015

How to Install a Bedroom Bed

Fig.1 Full Bed kit
By Gary Boutin

Supplies and Tools:

Mrs O had a day bed and removed to the trash.

This post show the nine steps on how to install a new full bed into a small bedroom.

Step 1: Fig.1 shows the bed kit which includes the header board, the footer board, two side rails and five mattress boards.
Step 2: Fig.2 shows the head of the bed.
Fig.2 Head board

Step 3: Fig.3 shows the foot side.
Fig.3 Footer board
Step 4: Fig.4 and fig.5 shows that the bed rails are inserted into the head board and the foot board. Now its time to add the bed planks that will hold the box spring and mattress.
Fig.4 Mattress boards
Fig.5 Mattress on the left

Step 5: Fig.6 shows the bed planks are placed evenly on the bed rails to hold the box spring and mattress.
Fig.6 Middle of the
bed boards

Step 6: Fig.7 shows the white box spring placed on top of the bed rails.
Fig.7 Box spring

Step 7: Fig.8 shows the top portion of the bed is the mattress and fig.9 shows the bed is ready for the sheets.
Fig.8 Mattress
Fig.9 Full bed finished
Step 8: Fig.10 shows that sliders were placed on each leg of the bed for easier carpet cleaning.
Fig.10 Bed sliders

Step 9: Fig.11 shows the the removal the metal bed frame to the garage.
Fig.11 Metal bed frame

Update: DIY Advisor has New blogs check them today:

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

No comments:

Post a Comment