How to Install a Decorative Towel Rack

Screw and drill bit

By Gary Boutin

Supplies and Tools:

Cordless screwdriver with Phillips bit

Hammer

Nail

Pencil

Phillips pan head screws

Torpedo level

Wood level 2-ft

Mrs. Black loves bright and wild decorations specially if unique and useful. Her home was located in Ontario, California in a well developed area.

This post shows the five steps on how to install a simple kitchen towel rack. 

Step 1: Fig.1 shows the towel rack kit. The towel rack holes was marked with a pencil.

Fig.1 Rack kit

Step 2: Fig.2 shows the use of a nail to create a pilot hole into the cabinet.

Fig.2 Pilot holes

Step 3: Fig.3 shows once the mark was on the kitchen cabinet, a cordless screwdriver with Phillips® bit and placed the pan head screws into the cabinet wall.

Fig.3 Small drill

Step 4: Fig.4 shows the towel rack on the first screw, and with a torpedo level leveling the towel rack.

Fig.4 Level

Step 5: Fig.5 shows the pencil to mark the second hole and placed the second screw into the hole of the towel rack. 
Step 6: Show the final towel rack in the kitchen cabinet.  Now she is ready to hang wild and interesting towels.

Fig.5 Finished

DIY Advisor Blogs:

Handyman Blog: DIY Advisor

Food Blog: From Gary Boutin

Artwork Blog: Light in Dark Artwork

Class-A Tests: DIY Class-A Drivers License Tests

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-