Fig.1 Dog fence being removed |
Supplies and Tools:
Diagonal cutters
Trash can
Every five years Mrs Baker's association recommends that the iron work around her home needs to be freshened up. For example metal gates, any metal ornaments that would be the responsibility of the association. Anything that was attached to the building would be painted by professional painters. It was the owner's responsibility to clean these metal gates of dirt, bird droppings and anything else that might make it difficult for the painters to do their work. A cleaning charge would be given to each homeowner who disregarded the association warning. Mrs Baker called my repair service to take care of her gate.
This post shows the six steps of removing the pet fence from the iron gate.
Step 1: Fig.1 shows metal gate had a plastic fence to keep an animal inside, long not used. The prior installer used white electrical ties to hold the plastic fencing on the metal gate.
Step 2: Fig.2 shows diagonal cutters used to cut the electrical ties from the gate.
Fig.2 Diagonal cutter |
Fig.3 Cutting the tie |
Fig.4 Bottom of gate |
Fig.5 Close up of electrical tie |
Fig.6 Close up of electrical ties |
How to Remove a Metal Gate Pet Fence:
Update: DIY Advisor has New blogs check them today:
- Handyman Blog: DIY Advisor
- DIY Advisor Sitemap
- Food Blog: From Kiwis To Pistachios
- Food Blog Sitemap
- Tool Blog: DIY Advisor Toolbox
- Tool Blog Sitemap
- Artwork Blog: Light in Dark Artwork
- Artwork Blog Sitemap
- Class-A Tests: DIY Class-A Drivers License Tests
- Class-A Tests Sitemap: Class-A Sitemap
- DIY Poem: DIY Poem Meter Blog
- DIY Poem Sitemap: DIY Sitemap
- Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.
Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-
No comments:
Post a Comment