How to Install Door Dog Security Screen

Black flat 
paint spray

By Gary Boutin

Supplies and Tools:
Black spray paint (metal paint) 
Cordless screwdriver with Phillips bit
Metal mesh dog screen 
Self drilling pan head (4)

Mrs. Handy wanted Mr. Handyman to fix it the rear entrance door so the dogs do not scratch up the door with their toenails. The Handyman picked up a dog screen at our local The Home Depot store. 

This post shows the five steps to installing a dog protection screen.

Step 1: Fig.1 shows the door measures 32-inches wide. Now measure your door width to determine which size screen will be needed for this job. These screens come in length of 30, 32 and 36 inches. Yes, larger screen size exists but these need to be ordered at the special service desk of your local warehouse store.

Fig.1 Taking picture

Step 2: Fig.2 shows to take the screen and place it against the door. Remove the screw bag and cardboard that comes with the screen.

Fig.2 Screen

Step 3: The screen come with 4-metal screws but these screws are the wrong type for this purpose. This job needed self drilling pan head screws because the dog screen was attached to a metal door. Fig.3 shows there are 4 locations where the screws anchors to the screen of the door. Use a cordless screwdriver with a Phillips bit and secure the screen with the pan head screws.

Fig.3 Pan head screw

Fig.4 shows the cordless driver screwing the bottom of the screen to the door. Pan head screws flat round top are used to the dogs toes do not get hurt if they scratch against the screws.

Fig.4 Self drilling screw

Step 4: Fig.5 shows a black paint spray can, the screen are without paint when purchase at the store. The black color was chosen and she wanted the screen to vanish rather than stand out. Painting the screen was done on a paint tarp, and was ready to be put up in our hour.

Fig.5 
Flat paint

Step 5: Fig.6 shows the completed project and now the door is protected from those the dogs toes and nails.

Update: DIY Advisor has New blogs check them today:

• Handyman Blog: DIY Advisor
• DIY Advisor Sitemap
• Food Blog: From Kiwis To Pistachios
• Food Blog Sitemap
• Tool Blog: DIY Advisor Toolbox
• Tool Blog Sitemap
• Artwork Blog: Light in Dark Artwork
• Artwork Blog Sitemap
• Class-A Tests: DIY Class-A Drivers License Tests
• Class-A Tests Sitemap: Class-A Sitemap
• DIY Poem: DIY Poem Meter Blog
• DIY Poem Sitemap: DIY Poem Sitemap

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

How to Paint and Repair Alley Window

Electric Drill

By Gary Boutin

Supplies and Tools:
Electric circular saw 
Electric drill and bits
Flat head screwdriver
Framing hammer
Liquid nails adhesive
Metal 16 gauge nails
Measuring tape
Oil base primer

Oil base brown paint

Paint Brush 4-inch

Fat Measuring Tape

Plywood Oriented Strand Board (OSB) 3/4 inch 
Silver metal paint 
Sheet rock screws

White silicone

Willie had a window in the rear of his cottage that overlooked an alley. He worried about his family safety, nothing had happened but graffiti had just been painted on his window screen. The window was not in use and the window had been replaced with hardboard not near enough security for my friend. He wanted the window and screen frame to be more secured.

This post shows thirteen steps to secure this window.

Step 1: Fig.1 shows a wooden frame with a metal screen.  
Step 2: Fig.2 shows the window looks like from the alley. It has painted over with white graffiti.
Step 3: Fig.3 shows a flat head screwdriver to remove the screen from the window.

Fig.1 Wooden frame

Fig.2 Window

Fig.3 Pry off screen

Step 4: Fig.4 and fig.5 shows removing the dirt with a 4-inch paint brush and dusted all over the window area. The plywood chosen was a 1-3/4-inch Oriented Strand Board (OSB) was used as sub-flooring. The plywood was measured and cut with an electric circular saw.
Step 5: Fig.6 shows the back sides were painted on both sides of the OSB plywood with oil base primer to seal the plywood board.

Fig.4 Paint frame

Fig.5 Dust main window

Fig.6 Oil primer

Step 6: Fig.7 shows Liquid Nails adhesive was applied to the back side of the plywood and inserted the board within the window frame. Sheet rock screws to add additional security to the plywood board.
Step 7: Fig.8 shows painted the front side of the board with the same paint as the back.
Step 8: Fig.9 shows a painted the white plywood window board with two coats of oil Base brown paint.

Fig.7 Liquid nails

Fig.8 Oil primed

Fig.9 Brown paint

Step 9: Fig.10 and fig.11 shows applied white silicone to fill the wooden gaps in the wooden frame and painted the metal screen with silver metal paint, to remove the red painted graffiti.
Step 10: Fig.12 shows prepared each side of the screen by using an electric drill with a bit to created several pilot holes for 16 gauge 4-inch nails on both sides of the screen. The screen is not for protection, it's for camouflage.

Fig.10 Silicone

Fig.11 Edge

Fig.12 Nailed

Step 11: Fig.13 shows the nails that were used to secure the screen to the wood edges.
Step 12: Fig.14 shows painted the screen frame edges brown to match the window. Use the nails as handles and pushed the window screen into place and hammered the nails into place.
Step 13: Fig.15 shows the window frame and the window screen finished.

Fig.13 Nail both edges

Fig.14 Oil painted

Fig.15 Finished

Handyman Blog: DIY Advisor

Food Blog: From Kiwis To Pistachios

Artwork Blog: Light in Dark Artwork

Class-A Tests: DIY Class-A Drivers License Tests

• Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-