Showing posts with label Texture Orange-peel. Show all posts
Showing posts with label Texture Orange-peel. Show all posts

Saturday, February 28, 2015

How to Repair a Ceiling Hole

Fig.1 Bad lamp
By Gary Boutin

Supplies and Tools:
Drywall 1/2 inch 6 in. in circular pattern
Drywall knives 6 inch
Mud pan
Fig.2 Ceiling hole
Razor knife or drywall saw
Tarp grey
Texture Orange-peel

The home owner hired some electricians to add more light into the kitchen. They needed access to the attic and one of them fell on an existing lamp pushing it through the ceiling. They finished the kitchen job but refused to repair the hallway damage. This is a simple job were the light was removed and the ceiling was repaired.

This post shows the six steps to repair a ceiling hole. 

Step 1: Fig.1 and fig.2 shows the hole in the ceiling that needs to be repaired. A partial layer of sheet rock was applied but was not flushed with the ceiling.
Step 2: Fig.3 shows that a tarp was placed over the rugged floor to prevent joint compound and drywall dust from damaging the floor. 
Fig.3 Tarp the floor
Step 3: Fig.4 shows the hole had some wires that needed to be cut and an existing metal light that needed to be removed. New sheetrock needed to be applied. Fig.5 shows a razor knife to cut the wallboard. Fig.6 shows the ceiling knife that was used to apply joint compound on the ceiling. Fig.7 shows the paper tape that was applied around the ceiling hole.
Fig.4 Fill the hole
Fig.5 Sheetrock sharp razor knife
Fig.6 Drywall knife
Fig.7 Paper tape
Step 4: After the hole is filled and joint compound was applied around the area. The joint compound was sanded and made smooth. Fig.8 shows the spot on the ceiling drying. Now all that is needed is to have the texture applied to the ceiling.
Fig.8 Ceiling repaired and drying
Step 5: Fig.9 and fig.10 shows the texture has been applied to the ceiling with spray texture.
Fig.9 Spray texture

Fig.10 Couple layers of texture
Step 6: Fig.11 shows the ceiling is finished and the final coat of texture has been applied.

Fig.11 Texture finished

Update: DIY Advisor has New blogs check them today:
  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow Current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

Posted by at No comments:
Labels: , , , , , ,

Sunday, February 15, 2015

How to Repair Kitchen Wall when the Old Backsplash was Removed

Fig.1 The tools
By Gary Boutin

 Supplies and Tools: 
Electric cords (Fig.1 shows a 50 foot cord)
Paint roller frame and small cover
Primer white (Kilz)
Porter Cable disc sander electric
Hook loop discs 60-grit (contractors pack)
Newspaper or better Kraft Paper 1-inch 
Scissors (paper and tape)
Texture orange-peel

A neighbor near us hired a local handyman to removed the 30 year old tile backsplash. The adhesive behind the aging tiles was very hard to remove. The handyman said he would return to finish the job the next day. Since they paid him up front for the job, he decided that the job was too hard to finish. He never returned.

This post shows the eight steps to repair the wall damage from a removed tile backsplash.

Step 1: Fig.1 shows some of the tools used to do this project.
Step 2: Fig.2 shows everything was removed from the counter top. Placing the newspaper or Kraft paper on the counter top will protect the top from getting scratched. Fig.3 shows a inexpensive chisel used to remove the brown adhesive from the kitchen wall. Fig.4 shows the electrical cord is out so the sander can reach all the areas of the kitchen. Here we are using a Porter-Cable 5" Random Orbit Sander. You will also need extra disks hook loop discs 60 grit is what was chosen for this job. Purchase a contractor's pack and get the best deal.
Fig.2 Orange Chisel
Fig.3 Paper on counter
Fig.4 Porter Cable Sanding disks
Step 3: Fig.5 shows that the adhesive was cut from the wall board and only the cardboard is left. Presently the cardboard is rough and now that the adhesive is completely removed. It's time to sand the wall down flat. 

Fig.5 Damaged sheetrock
Step 4: Fig.6 shows the end wall was sanded and the cardboard is flat and not protruding out as in Fig.5 when the cardboard was sticking out of the wall. Fig.7 shows another angle of the wall by the electrical plate the wall is sanded smooth.
Fig.6 Side view sanded wall
Fig.7 Front view sanded wall
Step 5: The next step is to apply joint compound over the sanded areas. After the wall is dry then the next step is to sand the wall using wall screens as perfect has possible. This is a very dusty job.

Step 6: Prior the texturing the wall, several coats of joint compound was applied and sanded flat. Fig.8 through fig.10 shows the application of orange peel texture once the wall was repaired and now is flat. Applying texture hide the wall imperfections.
Fig.8 Texture #1
Fig.9 Texture #2
Fig.10 Texture #3
Step 7: Fig.11 shows that the counter top has had a plastic tarp to protect the counter top from paint drops. A small roller frame and roller cover was used because it was more practical than using a standard 9 inch roller and cover. The long handle helps reach difficult parts of the wall, underneath wooden cabinets.
Fig.11 Primer roller
Step 8: Fig.12 shows the first coat of primer is being applied to the wall. Fig.13 shows the finale coat of white primer being applied to the wall before the owner has it painted.
Fig.12 Applying primer
Fig.13 Job finished

Update: DIY Advisor has New blogs check them today:
  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-
Posted by at No comments:
Labels: , , , , , , , ,
Subscribe to: Posts (Atom)