Showing posts with label San Bernardino California. Show all posts
Showing posts with label San Bernardino California. Show all posts

Sunday, July 7, 2013

How to Stake Up a New Tree In a Winded Area

Fig 1 Stakes tree
By Gary Boutin

Supplies and Tools:
Commercial scissors
Fence post driver
Mallet  
Staple gun with staples
Hose and wire tree ties
Webbing or polyethylene strips
Wooden stake-2 

Mr. Jim lives in the High Desert of the San Bernardino Mountains, in town called Joshua Tree. In the early afternoon the winds are so strong that it may easily pull down mature tree. He asked me to plant his new tree in the front yard. At the time twenty new trees were already been planted and these new tree just needed to be staked. 

This post shows the four steps to secure a new tree.

It important to understand what it means to stake a tree. According to the Definition web site Random House Webster's College Dictionary; the noun (n.) stake is a stick or post pointed at one end for driving into the ground as a boundary mark, part of a fence, support, etc. 

Step 1: Find two stakes  for the tree. Lot of Warehouse stores try to sell the 1x2 or the 2x2 stakes made of Douglas fir. These wood stakes are not strong enough to handle a tree, maybe a plastic sign. Our local warehouse store called The home Depot has rounded wood stakes for a reasonable price of $4 each. The stakes are made of Mendocino treated tree stake are 92 inches (7.666 ft) which are extremely strong for handling trees in a high wind area. Fig.2 shows the tree is staked up and ready for the environment.
Fig.2 Wrapped 
in rubber tie
Step 2: A fence post driver can easily picked up for $20. Post driver makes the difference in pushing the stake into the ground. Fig.3 shows a metal mallet that could be used to hammer the wooden stakes into the ground can cause injuries. For most trees: the stake should be one-third of the height of the tree. 
Fig.2 Metal sledge

Step 3: Hose and wire tree ties is the last step needed to tie down the tree to the wooden stakes. Apply the tie on the tree first then attach the two ends to the pole, repeat the same steps on the other side. Some systems use nails to hold the wire ties on the wooden post. If this is going to be the choice remember to pre-drilled the post before applying the metal screw otherwise the post will split. It an extra step that can save a lot of new post and yet be strong enough to hold the ties in place. 
Step 4: Just remember that this is a temporary choice until the tree is strong enough to handle the winds. The choice of staking is to give the tree trunk a chance instead of breaking off in the wind. 



Update: DIY Advisor has New blogs check them today:

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

Posted by at No comments:
Labels: , , , , , , ,

Monday, April 8, 2013

How to Repair Baseboard Damaged by a Vacuum Cleaner

Paintbrush
By Gary Boutin

Supplies and Tools:
BEHR® Premium Plus Ultra Ultra Pure White
Blue painting tape
Paint brush 2-inch
Paint tray  

Mrs. Toledo lives in San Bernardino, California. She called because she had seen my blog and she e-mailed me a small list of repairs. This job is one item on her repair list. She had hire a local housekeeper with a vacuum cleaner with a worn rubber edge. Every time she touched the baseboard with her vacuum, it left a mark. Below is the quick fix for the problem.

This post shows the three steps to repairing vacuum cleaner damage baseboards.

Step 1: Find the damaged baseboard and apply painter's tape to the wall above the baseboard and in the carpet area. Apply the paint tape deep into the carpet to get to the bottom of the baseboards. Fig.1 shows the damaged baseboard that has vacuum wear marks on each corner.
Fig.1 Tape walls 
around baseboards
Step 2: First purchase a good quality enamel paint. This job used BEHR® Premium Plus Ultra Ultra Pure White paint was used for the baseboard. A 2-inch paintbrush was used to apply the paint to the damage areas. Fig.2 shows the the painting of the baseboard and fig.3 shows the first coat has been applied.
Fig.2 First primer coat
Fig.3 primer coat
Step 3: Fig.4 shows the second coat of paint was applied to the baseboard. Fig.5 shows the final job the paint tape has been removed and the damages has been repaired.
Fig.4 Second primer coat
Fig.5 Job Finished


Update: DIY Advisor has New blogs check them today:

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-

Posted by at 1 comment:
Labels: , ,
Subscribe to: Posts (Atom)